Product Description
The LM35 is a precision analog temperature sensor with an output voltage directly proportional to temperature in degrees Celsius. Its simple 3-pin TO-92 package makes it ideal for student projects, Arduino and ESP32 applications, temperature monitoring, automation, and embedded systems.
LM35 Temperature Sensor – TO-92
₹55.00
Description
Key Features
| Specification | Details |
| Sensor Type | Analog Temperature Sensor |
| Model | LM35 / LM35DZ |
| Package | TO-92, 3-Pin |
| Operating Voltage | 4V–30V DC |
| Temperature Range | -55°C to +150°C |
| Output | Analog Voltage |
| Sensitivity | 10 mV/°C |
| Accuracy | Typically around ±0.5°C at 25°C |
| Calibration | Directly calibrated in Celsius |
| Compatibility | Arduino, ESP32, Raspberry Pi with ADC, and other microcontrollers |
Applications
- Arduino and ESP32 projects
- College mini and major projects
- IoT temperature monitoring
- Weather monitoring systems
- Smart home automation
- Temperature-controlled devices
- Industrial monitoring
- HVAC and environmental monitoring
Cost :65 rupees
Related products
-
₹30.00Product Specification Sheet
Hi-Watt (HW) 6F22 9V General Purpose Battery
Short Overview
The Hi-Watt (HW) 6F22 is a standard 9-Volt general-purpose zinc-carbon battery designed for low-to-moderate power drain devices. Features a rectangular prism form factor with a polarized snap terminal connector on top (small circular positive terminal and larger hexagonal negative terminal) to prevent reverse polarity connection. It is commonly utilized in portable electronics, transistor radios, DIY electronics, and home safety equipment.
-
₹250.00Overview
The displayed module is a vibrant Thin-Film Transistor (TFT) Liquid Crystal Display (LCD) breakout board, commonly driven by the popular ILI9341 display controller. It features a high-contrast 262K RGB color display with an integrated LED backlight and a standard 4-wire Serial Peripheral Interface (SPI) for fast, efficient data transmission. Designed with convenient mounting holes and dual header interfaces (11-pin main header and 5-pin auxiliary header), this module is widely used in embedded systems, DIY microcontroller projects, industrial HMI interfaces, and portable electronics.
Key Highlights: • Full-color 240×320 QVGA resolution delivering sharp graphics and text.
• Fast 4-wire SPI communication interface reducing required I/O pins.
• Integrated 3.3V voltage regulator and onboard logic level shifter compatibility.
• Built-in SD card slot on auxiliary header for image and font storage.
-
₹550.00Overview
The ESP32-CAM is a compact, low-cost microcontroller development board featuring the powerful ESP32-S chip integrated with Wi-Fi and Bluetooth (BLE) capabilities, alongside an onboard camera interface and MicroSD card slot. As shown in the image, it comes paired with an OV2640 2-Megapixel camera module and features an onboard bright white LED for flash or illumination. Its small form factor (27mm x 40.5mm) makes it an ideal solution for Internet of Things (IoT) vision projects, remote monitoring, and smart home automation.
-
₹140.00Overview
The image depicts a standard 0.96-inch monochrome OLED (Organic Light-Emitting Diode) display module, commonly based on the SSD1306 driver IC. This display features high contrast, self-illuminating pixels (requiring no backlight), low power consumption, and a simple 4-pin I2C interface (VCC, GND, SCL, SDA). It is widely used in embedded electronics, IoT projects, smart wearables, and DIY microcontroller applications (such as Arduino, ESP32, ESP8266, and Raspberry Pi).
Reviews
There are no reviews yet.