₹140.00
Overview
The image depicts a standard 0.96-inch monochrome OLED (Organic Light-Emitting Diode) display module, commonly based on the SSD1306 driver IC. This display features high contrast, self-illuminating pixels (requiring no backlight), low power consumption, and a simple 4-pin I2C interface (VCC, GND, SCL, SDA). It is widely used in embedded electronics, IoT projects, smart wearables, and DIY microcontroller applications (such as Arduino, ESP32, ESP8266, and Raspberry Pi).
Pinout Configuration
| Pin Name | Type | Description |
| VCC | Power | Power Supply Input (typically 3.3V to 5.0V DC) |
| GND | Power | System Ground |
| SCL | Input | Serial Clock Line for I2C communication |
| SDA | In / Out | Serial Data Line for I2C communication |
Key Technical Specifications
| Specification Parameter | Details / Value |
| Display Technology | OLED (Organic Light-Emitting Diode) – Self-Illuminating |
| Screen Size | 0.96 inches (diagonal) |
| Resolution | 128 x 64 pixels |
| Driver Controller | SSD1306 (or compatible, e.g., SH1106) |
| Communication Protocol | I2C (Inter-Integrated Circuit) |
| I2C Address | 0x3C (Default) or 0x3D (selectable via solder jumper on back) |
| Operating Voltage | 3.3V to 5.0V DC (Integrated LDO regulator) |
| Display Colors | Monochrome (Blue / White / Yellow-Blue dual zone depending on variant) |
| Viewing Angle | Ultra-wide (> 160 degrees) |
Key Features & Advantages
Applications & Uses
• Consumer Electronics & DIY Projects: Custom audio volume/equalizer indicators, digital clocks, micro game consoles, and menu systems.
Product Specification Sheet
Hi-Watt (HW) 6F22 9V General Purpose Battery
Short Overview
The Hi-Watt (HW) 6F22 is a standard 9-Volt general-purpose zinc-carbon battery designed for low-to-moderate power drain devices. Features a rectangular prism form factor with a polarized snap terminal connector on top (small circular positive terminal and larger hexagonal negative terminal) to prevent reverse polarity connection. It is commonly utilized in portable electronics, transistor radios, DIY electronics, and home safety equipment.
Product Description
The LM35 is a precision analog temperature sensor with an output voltage directly proportional to temperature in degrees Celsius. Its simple 3-pin TO-92 package makes it ideal for student projects, Arduino and ESP32 applications, temperature monitoring, automation, and embedded systems.
Overview
The ESP32 Development Board (ESP-WROOM-32 / DevKit V1) is a low-cost, low-power system-on-a-chip (SoC) microcontroller unit developed by Espressif Systems. It integrates dual-mode Wi-Fi (802.11 b/g/n) and Bluetooth (v4.2 BR/EDR & BLE) connectivity, making it an industry standard for Internet of Things (IoT) applications, smart home systems, wearable electronics, and embedded robotics.
The board features a high-performance Tensilica Xtensa 32-bit LX6 dual-core processor operating at up to 240 MHz, onboard PCB antenna, CP2102/CH340 USB-to-UART bridge for direct programming via Micro-USB, AMS1117 3.3V voltage regulator, and dual onboard push buttons (EN/Reset and BOOT).
Overview
The MAX7219 8×8 LED Matrix Display Module is a compact, versatile display solution integrating 64 individual red light-emitting diodes arranged in an 8-row by 8-column grid. Driven by the integrated MAX7219 driver IC, this module offloads matrix scanning, multiplexing, and brightness control from the main host microcontroller, allowing seamless display drive using just 3 SPI control lines (VCC, GND, DIN, CS, CLK).
The board includes input (IN) and output (OUT) header connections, enabling multiple modules to be cascaded together in series to form larger LED banner displays, digital clocks, or moving message displays.
Login
Reviews
There are no reviews yet.