-
₹500.00Overview
The ESP32 Development Board (ESP-WROOM-32 / DevKit V1) is a low-cost, low-power system-on-a-chip (SoC) microcontroller unit developed by Espressif Systems. It integrates dual-mode Wi-Fi (802.11 b/g/n) and Bluetooth (v4.2 BR/EDR & BLE) connectivity, making it an industry standard for Internet of Things (IoT) applications, smart home systems, wearable electronics, and embedded robotics.
The board features a high-performance Tensilica Xtensa 32-bit LX6 dual-core processor operating at up to 240 MHz, onboard PCB antenna, CP2102/CH340 USB-to-UART bridge for direct programming via Micro-USB, AMS1117 3.3V voltage regulator, and dual onboard push buttons (EN/Reset and BOOT).
-
₹550.00Overview
The ESP32-CAM is a compact, low-cost microcontroller development board featuring the powerful ESP32-S chip integrated with Wi-Fi and Bluetooth (BLE) capabilities, alongside an onboard camera interface and MicroSD card slot. As shown in the image, it comes paired with an OV2640 2-Megapixel camera module and features an onboard bright white LED for flash or illumination. Its small form factor (27mm x 40.5mm) makes it an ideal solution for Internet of Things (IoT) vision projects, remote monitoring, and smart home automation.
-
₹450.00Overview
The ESP32-DevKitC / ESP32-WROOM-32 is a powerful, low-cost micro-controller development board based on the Espressif Systems ESP-WROOM-32 module. Equipped with integrated Wi-Fi (802.11 b/g/n) and dual-mode Bluetooth (Bluetooth v4.2 BR/EDR and BLE), it is designed as a versatile, scalable solution for Internet of Things (IoT) applications, smart home systems, wireless sensor networks, and industrial automation.
The board includes an on-board CP2102 USB-to-UART bridge for seamless programming and debugging, an AMS1117 3.3V voltage regulator, Micro-USB connectivity, reset/boot push buttons, and standard 0.1″ header pins for rapid prototyping.
-
₹850.00Overview
The ESP32-WROVER-E Development Board is a powerful, feature-rich microcontroller board designed by Espressif Systems. It is built around the ESP32-D0WD-V3 SoC, featuring a dual-core 32-bit Xtensa LX6 processor. A defining feature of the WROVER series is the inclusion of an additional 8 MB of SPI PSRAM (Pseudo-static RAM) alongside standard flash memory, making it ideal for memory-intensive applications such as audio streaming, AI/ML edge processing, and complex web servers.
The board includes an integrated USB-to-UART bridge (Silicon Labs CP2102), Micro-USB connector for power and programming, onboard reset (EN) and boot buttons, status LEDs, and breadboard-friendly GPIO headers. It seamlessly supports Wi-Fi (802.11 b/g/n) and Bluetooth (v4.2 BR/EDR and BLE) connectivity.
-
₹105.00Overview
The FC-28 Soil Moisture Sensor is a widely used, low-cost electronic module designed to measure the volumetric water content in soil. It operates on the resistive measurement principle: as moisture content in the soil increases, its electrical conductivity increases (resistance decreases). Conversely, dry soil exhibits high electrical resistance.
The sensor assembly consists of two main components:
• Soil Probe: A two-pronged PCB probe inserted directly into the soil to detect electrical conductivity changes.
• Control Module: Built around the LM393 low-power dual voltage comparator IC, featuring an adjustable potentiometer for threshold sensitivity, dual output pins (Analog & Digital), and power/status LED indicators. -
₹65.00Overview
The HC-SR04 is a widely popular, low-cost ultrasonic distance sensor module designed for non-contact distance measurement. It operates on sonar principles, emitting ultrasonic sound bursts at 40 kHz and calculating the distance to an obstacle based on the time taken for the echo signal to return to the receiver.
As shown in the image, the module consists of an ultrasonic transmitter (labeled ‘T’) and receiver (labeled ‘R’), a 4-pin male header (Vcc, Trig, Echo, Gnd), a precision timing crystal, and onboard processing ICs on the back. It offers high accuracy (up to 3mm resolution) and stable readings ranging from 2 cm to 400 cm (~4 meters), making it an essential component for robotics, automation, and DIY microcontroller projects.
-
₹50.00Overview
The HW-479 (3_Clr / KY-011 / KY-009 derivative) is a versatile 3-color (RGB) LED breakout module designed for microcontroller and electronic prototyping applications. It integrates a 5mm full-color RGB light-emitting diode with onboard current-limiting resistors (151 / 150 Ω SMD resistors) mounted on a compact black printed circuit board.
By supplying Pulse Width Modulation (PWM) signals to the control pins, the module can blend Red, Green, and Blue primary light channels to produce virtually any color spectrum, making it ideal for visual indicators, status lights, and dynamic lighting effects in Arduino, Raspberry Pi, ESP32, and STM32 projects.
-
₹45.00Overview
The IR Flame Sensor Module shown in the image is a high-sensitivity electronic detection board designed to detect fire sources or light sources with wavelengths ranging from 760 nm to 1100 nm. At its core, the sensor features an infrared photodiode (the black receiver bulb) paired with an LM393 high-precision voltage comparator IC.
The module provides both Analog (AO) and Digital (DO) output signals. The analog output gives a real-time signal strength reading proportional to the light/fire intensity, while the digital output produces a binary HIGH/LOW signal triggered when the detected radiation exceeds a adjustable threshold set via the onboard potentiometer. It also features dual LED indicators for Power status (PWR-LED) and Digital Output activity (DO-LED).
-
₹25.00Overview
The KY-016 RGB LED Module is a versatile, 3-color light-emitting diode breakout board designed for microcontrollers such as Arduino, Raspberry Pi, and ESP32. It features a 5mm common-cathode RGB LED capable of generating a full spectrum of colors (red, green, blue, and custom color mixes like yellow, cyan, purple, and white) using Pulse Width Modulation (PWM). The module includes onboard current-limiting resistors (labeled ‘121’ = 120 Ω) on the red, green, and blue channels to protect the LED chips and ensure stable operation across standard microcontrollers.
-
₹50.00Overview
The Light Sensor Module (v0.9b, model 034000WH2 / 10589A-01) is an analog electronic board designed to detect ambient light levels. It features a Photoresistor (Light Dependent Resistor / LDR) as its primary sensing element. As light intensity increases, the resistance of the LDR decreases, producing a corresponding change in output voltage.
The module includes an onboard operational amplifier (U1, LM358B / MV358I) configured as a buffer/signal conditioning stage to ensure stable, reliable signal transmission to microcontrollers such as Arduino, Raspberry Pi, ESP32, and other embedded platforms.
-
₹55.00Product Description
The LM35 is a precision analog temperature sensor with an output voltage directly proportional to temperature in degrees Celsius. Its simple 3-pin TO-92 package makes it ideal for student projects, Arduino and ESP32 applications, temperature monitoring, automation, and embedded systems. -
₹110.00Overview
The MAX7219 8×8 LED Matrix Display Module is a compact, versatile display solution integrating 64 individual red light-emitting diodes arranged in an 8-row by 8-column grid. Driven by the integrated MAX7219 driver IC, this module offloads matrix scanning, multiplexing, and brightness control from the main host microcontroller, allowing seamless display drive using just 3 SPI control lines (VCC, GND, DIN, CS, CLK).
The board includes input (IN) and output (OUT) header connections, enabling multiple modules to be cascaded together in series to form larger LED banner displays, digital clocks, or moving message displays.
-
₹300.0018650 Lithium-Ion Battery Cell
Technical Overview, Specifications, Applications, and Operating Characteristics
Short Overview
The image depicts a standard cylindrical 18650 rechargeable Lithium-Ion (Li-ion) battery cell featuring an orange high-temperature PVC shrink wrap. The designation ‘18650’ directly specifies its physical dimensions: 18 mm in diameter and 65 mm in height, with the ‘0’ indicating its cylindrical form factor.
Renowned for high energy density, low self-discharge rates, and high nominal discharge voltage (~3.6V–3.7V), 18650 cells serve as fundamental building blocks for both standalone portable electronic devices and multi-cell battery packs used in electric vehicles and renewable energy storage system (ESS) modules.
-
₹550.00P10 LED Matrix Display Module is a high-brightness 10 mm pitch SMD LED panel featuring a 16 × 32 pixel matrix. Operating at 5 V DC, it is ideal for scrolling text, advertisements, announcements, counters, digital signboards, and information displays. Multiple modules can be cascaded to create larger LED display panels, making it suitable for Arduino, ESP32, Raspberry Pi, and dedicated LED controller projects.
-
₹400.00Product Datasheet & Specification Sheet
R-INVENTION 12V 5A (60W) Power Supply Unit | Model: GX-12-60
Overview
The R-INVENTION GX-12-60 is a slim-profile, highly efficient 60-Watt Switch Mode Power Supply (SMPS) / LED Driver. It converts AC input voltage (180V–265V AC, 50/60Hz) into a stable 12V DC output delivering up to 5 Amperes. Designed with a durable metallic mesh/perforated housing for heat dissipation and standard screw-terminal connections, this power supply unit is certified with BIS compliance for secure and continuous operational performance.
-
₹150.00Product Technical Datasheet
ICR-18650 2200mAh 3.7V Rechargeable Lithium-ion Cell
Product Overview
The ICR-18650-2200mAh is a standard cylindrical Lithium-ion (Li-ion) rechargeable battery cell manufactured by HONGLI. Featuring a nominal voltage of 3.7V and an energy capacity of 8.14Wh, this cell is widely recognized for its high energy density, reliability, and versatility across a broad range of portable electronic devices, battery packs, and DIY power projects. The cell includes standard BIS certification markings (R-41135402), making it suitable for compliant commercial and industrial supply chains.